Save off-₹4000

Visonic Wireless Burglar Alarm Kit PME (433) KIT

Availability: In stock

Sku: 8900000014125

20 Review(s)
2.90 out of 5
Write review for this product
Quick Overview

28 Wireless Zones, which allows you to connect 28 Wireless detectors
Access from remote telephones: You may access the Alarm System from a remote telephone by dialing to your own land line number and Arm/Disarm it or receive system status information.Kit Content

1 – PowerMax Express Panel
1 – Wireless Keyfob (MCT-234)
1 – Wireless Door Contact (MCT-302)
1 – Pet Immune Wireless Motion Detector(K9-85))

Quantity

26,900.00 22,900.00

Visonic Wireless Burglar Alarm Kit PME (433) KIT

28 Wireless Zones, which allows you to connect 28 Wireless detectors
Access from remote telephones: You may access the Alarm System from a remote telephone by dialling to your own landline number and Arm/Disarm it or receive system status information.
Looking after elderly, physically handicapped and infirm individuals: The system can be programmed to monitor activity within the protected area .
Disarming under duress: If a user is forcibly compelled to disarm the system (for example at gun point), he can use a special code that disarms the system apparently as usual, but a silent call to pre-defined telephone numbers.
System supervision: All wireless peripherals within the protected site send periodic supervision messages. If such a message is overdue, the Alarm System displays an ‘inactivity’ trouble message. Your installer can disable this feature if so desired.
Battery supervision: You do not have to worry about ‘dead’ batteries. The Alarm System displays a ‘Low Battery’ message whenever a battery in a wireless sensor is found to be near the end of its useful life. When the battery voltage in the wireless siren is low, a low battery message is sent to the alarm system. After the low voltage message delivery, at least 2 siren alarms are possible before the siren is totally inactive.
Battery life of minimum 1 year for each sensor under optimal conditions.
Built-in PSTN(Telephone Line) communicator can be connected to existing fixed landline which can work as a backup to the GSM
Latch key function which calls the owner when the panel is disarmed by an authorized user. Informs the owner when the shop/office is opened or parents when their children comes home
Completely wireless with only cable required for power to the main control unit and telephone line. Very easy installation for existing home and offices as it does not require any provision for wiring
In built 90 db siren in the panel itself
Provision to connect completely wireless outdoor siren with flashing lights which becomes a first visual deterrent for the burglars. Under ideal conditions the battery life of the outdoor siren is 3 years
Easy operation for arm and disarm. Can be used by elderly or children or servent
Multiple arming modes:
AWAY: When nobody is in the premises
HOME: When you are inside the premises. You can assign which sensors will be armed and which are disarmed in this case.
AWAY-INSTANT: Arm the system without an entry delay when notbody is inside the premises.
HOME-INSTANT: Arm the system without an entry delay when the premises is occupied.
LATCHKEY: Get a notification when your children or staff disarms the system in your absence.
BYPASS: Leave certain individual sensors disarmed and partially arm the system
Range of optional completely wireless indoor and outdoor sensors and emergency buttons like Pet Immune Wireless Motion Detector, Magnetic Contact , Outdoor detector, Flood Detector, Advanced Acoustic Glass Break Wireless Detector and Wireless Smoke Detector
Partition-ready – controls up to 4 partitions (optional)
Easy-view LCD display and icon-based keypad
Back-up battery – supplies multiple peripherals and also backs up internal GSM/GPRS/IP modules
Full compliance with most international standards and regulations, including: FCC, CE and EN50131 grade 2
Voice Communication Facility is not available.

Kit Content
1 – PowerMax Express Panel Visonic Wireless Burglar Alarm Kit PME (433) KIT
1 – Wireless Keyfob (MCT-234)
1 – Wireless Door Contact (MCT-302)
1 – Pet Immune Wireless Motion Detector(K9-85))
Available only in 433.9 MHz.

Note: Installation Charges apply. This is not a standalone burglar Alarm. It requires one of the following panels to work together:

Visonic Wireless Burglar Alarm Kit PME (433) KIT

Visonic Wireless Burglar Alarm Kit With GSM PME (433) KIT

Visonic PowerMax Complete Wireless Burglar Alarm Kit VPMCKit
Download “My Visonic” Apps from:

Install My Visonic App for Android Phones Install My Visonic App for Apple Phones Install My Visonic SMS App for Android Phones Install My Visonic SMS App for Apple Phones Install My Visonic App for Android Phones Install My Visonic App for Apple Phones

Visonic PowerMax Express Wireless Kit PME (433) KIT

custom contents goes here
Top